Ideate: 888.662.7238 | Imaginit: 415.593.6000
Author: Revit MEP, Revit

Revit MEP 2014 has some great enhancements, one of the best is the new ability to Cap open ends on Revit MEP Duct and Pipe.

One of the most consistent problems facing the Duct and Pipe designers that we come across here at Ideate, Inc. during support cases dealing with Duct or Pipe Calculations is “missing” end caps.

New functionality has been enabled that will add cap(s) on open ends of pipe and duct content. There are two methods in which this functionality can be used. The first method is to select pipe/duct content and then use the ribbon button “Cap Open Ends”. This method will add cap(s) to all open ends of the selected content. The second method is to right click on a pipe/duct connector and select “Cap Open End” from the popup menu. This method will cap the open end of the connector that was selected.

The routing preferences will be used in conjunction with the Cap On Open end functionality to determine which cap will be added to the open end of the pipe/duct content.

While this feature could probably be used for other reasons, it was built targeting the following use cases: 

Don’t forget to look through other great features our Ideate Technical Team has found in the new 2014 releases for AutoCAD MEP, Revit Structure, Revit Architecture, Civil 3D, AutoCAD, and more.

For more information on the software solutions, training and consulting Ideate provides, please visit the Ideate, Inc. homepage.

         Bill Johnson
Bill Johnson
Senior Application Specialist MEP/AEC Solutions

Bill has over 25 years experience in applying MEP & AEC design solutions for large commercial companies, this has led to actively developed Autodesk® Revit® implementation strategies, techniques, and procedures for architectural and MEP companies. He has worked for TEECOM Design Group, GTE/GTEL, Greg LeDoux and Associates, and Scottish Power in England. Bill is an Autodesk MEP Implementation Certified Expert, and has been the Lead Designer for several multi-million dollar communication sites which have included structural, electrical, HVAC, conduit, cable plans and equipment layouts. He graduated from the Pasadena Institute of Technology and has a Sustainable Design Certification from the University of California at Berkeley.